沥青泵具有＂强制锁定＂功能Asphalt pump with a ＂

发布日期：2017-04-12 点击：次

沥青泵具有"强制锁定"功能，可将转子和轴定位，降低磨损，延长使用寿命。泵设有阀，可保护系统不受超压的损坏，自动溢流。泵反转时，应将阀反向安装，阀螺母须朝向吸油口。Asphalt pump with a "compulsory lock" function, can be rotor and shaft accurate positioning, to reduce wear and prolong service life. Pump equipped with pressure relief valve, which can protect the system from overpressure damage, automatic overflow. Pump reversal, should will valve reverse installation, relief valve nut must be toward the oil suction.

为便于沥青泵的和排出口的连接，泵壳体能够在支架上旋转八个角度。

沥青泵是具有九十年代水平，国内的粘稠液体需送泵，该泵用于高温的粘稠液体、稀与稠的悬浮液体、浮状液体的输送，具有保温和加热及控制超压的功能。For convenience of asphalt pump inlet and outlet connection, pump shell to support the rotary eight Angle.

Asphalt pump is a ninety s international level, the most advanced domestic thick liquid need to pump, the pump used for high temperature of the thick liquid, thin and thick suspension liquid, floating form liquid delivery, have heat preservation and heating and control overpressure function.

沥青泵是专为输送需要加热和保温和重质粘稠液，、结构简单、使用维修方便，属于容积式内齿转子泵。泵内采用正排量转子和惰轮组合体，使泵有需送量大、流量平稳、噪声低、内泄漏量小、密封性能好和结构紧凑的优点。泵的各项性能技术指标明显高于国内同类产品。

沥青泵的正排量转子和惰轮组合体工作中有较好的缓冲作用，能达到低切变，无肪冲的液体需送。内齿轮的齿形为冠齿形，内齿泵腔的"通进容积"，是由泵体月牙形壁面和两上液体封闭面的轮齿表面围成的，在齿轮的不断旋转中产生压力液体，达到需送的目的。

Asphalt pump is designed for conveying need heating and heat preservation and heavy viscous fluid, reasonable design, simple structure, convenient operation and maintenance, belongs to the volume type internal tooth rotor pump. Pump used in positive displacement rotor and idler wheel assembly, make the pump to send a large quantity, flow smooth, low noise, internal leakage quantity is small, sealed performance is good and the advantages of compact structure. The performance of the pump technology index obviously higher than domestic products.

Asphalt pump positive displacement rotor and idler wheel assembly work has good buffer effect, can achieve low shear, no Fang impact liquid need to send. Internal gear tooth profile for crown profile, inner gear pump cavity "pass into volume", is by the pump body crescent wall and two on liquid sealing faces tooth surface surrounded, in gear continuous rotation pressure liquid, to achieve the purpose of the need to send.

输送沥青泵 SPF20R38G10W2三螺杆泵船用

输送丙酮泵 SPF20R38G10W2三螺杆泵船用

输送丙酮泵 SMH80R46E6.7W23三螺杆泵

输送汽油泵 SMH120R42E6.7W23三螺杆泵头

输送苯泵 KCB-300齿轮泵

输送化学剂泵 KCB-300齿轮泵

输送酶泵 SNH440R52U12.1W21三螺杆泵头

输送柴油泵 SMH80R42E6.7W23三螺杆泵头

输送分散剂泵 SNH940R46E6.7Y-W29三螺杆泵

输送乳油泵 SNH120R46E6.7YW21三螺杆泵泵头

输送原油泵 SNGF80R46G10W21三螺杆泵泵头

输送染料泵 G135-1单螺杆泵